AccessiSoft specializes in products Created by a Blind Student for Blind Students™

 
Nemetex Nemeth Back-Translator™

A full-functionality copy of Nemetex Nemeth Back-Translatorä (Version 2.3.2) is available for a free 30-Day evaluation.  To evaluate Version 2.3.2 of Nemetex Nemeth Back-Translatorä, follow the steps below:

1.  Review User's Agreement.

2.  Review User's Guide.

3.  Load/verify correct Java installed.

4.  Load Java Screen Reader Interface Software (optional for accessibility).

5.  Load/verify LaTeX software.

6.  Download and install Nemetex program.

7.  Obtain evaluation license key.

8.  Save license key to Nemetex folder.

9.  Turn-off/verify off UAC (Windows Vista^Ò or Windows^Ò 7 only).

10.  Click on the Nemetex icon to start the program.

11.  Turn UAC back on if desired (Windows Vista^Ò or Windows^Ò 7 only).

12.  Run a test file through Nemetex.

13.  Purchase a permanent license key if Nemetex works well for you!

Detailed Procedure

1.  Click here to review the Evaluation Version User's Agreement.

2.  Review the latest Nemetex Nemeth Back Translator User's Guide.  (To save a copy, right click, then select "Save Target As" and specify where you want to store it.)  You will also receive a bundled copy when you perform step 6 below.

3.  Verify you have the most recent version of Java™ loaded on your computer by visiting http://java.com/en/download/installed.jsp and following the on-screen instructions. Firewall and/or security software settings may need to be adjusted to allow the verification and update processes to work.

4.  If JAWS^â for Windows^â is to be used with Nemetex, the Javaä Access Bridge For Windows Operating System interface software must be installed (available for 32-bit operating systems only). It can be found for free download at http://java.sun.com/products/accessbridge/ (install the most recent version). The Javaä Access Bridge For Windows Operating System must be installed, or re-installed if previously installed, after installing a Javaä RTE update as discussed in step 3 above.

If Window-Eyes™ is to be used with Nemetex, interface software must also be installed.  WE4Java 0.9.19 by Jay Macarty is the recommended application to be installed (available for 32-bit operating systems only). It can be found for free download from GW Micro Script Central at http://www.gwmicro.com/Script_Central/Scripts/Script_Details/?scriptid=1222 (install the most recent version).  WE4Java must be installed, or re-installed if previously installed, after installing a Javaä RTE update as discussed in step 3 above.

Click here for procedures from Microsoft to determine if your operating system is 32-bit or 64-bit.

5. The final output of the Nemetex Nemeth Back-Translatorä program will be a .TEX file which is then readable by any standard LaTeX-based publishing software program such as TeXnicCenter or a commercial product such as Scientific Notebook.  If you do not have a commercial LaTeX-based publishing software program such as Scientific Notebook installed on your PC, click here for information about downloading both TeXnicCenter and MiKTex.  For reference, the Nemetex Back-Translation Process Flow Chart describes the complete back-translation process and all the steps required.

6.  Install the Nemetex Nemeth Back-Translatorä  main program by downloading or running directly the set-up file (≈ 2 MB) upon signifying below you have read and accept the User's Agreement.  When asked whether to Open or Run the file, we recommend you choose to save it to "C:\Program Files" (or "C:\Program Files (x86)" for 64-bit Windows Vista^Ò or Windows^Ò 7), make a back-up copy, then open/run it from there.  You may need to adjust firewall or security settings to successfully complete the download. 

After following the steps above, the program will have been installed, but cannot be started without an evaluation license key, which will be e-mailed to you after requesting it in the Step 7 below.

Accept License Agreement and Download/Install     
Decline License Agreement  

7.  Request a 30-Day Evaluation License using the information request form on the bottom of the Contact Us page.  The 30-Day Evaluation License will be sent via e-mail to the e-mail address you provide.

8.  After you receive the license key file, save it into the folder on your computer containing the program (normally "C:\Program Files\Nemetex" or "C:\Program Files (x86)\Nemetex" for 64-bit Windows Vista^Ò or Windows^Ò 7).  Do not attempt to open and read the file (not required; Nemetex will read it automatically).  We recommend you include the license key in the back-up copy you make of the program.

9.  For Windows Vista^Ò or Windows^Ò 7, turn-off User Access Control (UAC) (if not already turned off) to allow Nemetex to properly store your new license key for future use upon start-up.  Do so by entering the Control Panel via the Start-up Menu, selecting "User Accounts and Family Safety", then "User Accounts."  Note that if you have the Control Panel set-up for the Classic View, you can select "User Accounts" directly.  Then uncheck the box next to "Turn User Account Control On or Off."  Finally, restart your computer to effect the change in UAC status.

10.  Click on the Nemetex icon on your desktop to start the program and follow on-screen instructions.

11.  Once Nemetex is up and running, if desired, turn UAC (for Windows Vista^Ò or Windows^Ò 7) back on by performing step 9 again, but this time by leaving the check box checked instead of unchecked.

12.  Run a test file through Nemetex.  If you do not have immediate access to a six-key entry-capable Braille Notetaker, but want to evaluate Nemetex, right click the paper icon below, select "Save Target As", and save the sample .TXT input file to a convenient location on your computer for use (direct import method) during evaluation.   Or, if you click directly on the paper and pencil icon below, you can copy the contents of the file and paste it into Nemetex using the copy and paste method.

The sample .TXT file below is the same file used to produce the sample output .PDF file on the Nemetex page of this web site.  You can either right-click on the paper and pen icon below and Save As to somewhere on your computer (and then import the file into Nemetex), or you can open the file directly by left clicking on the icon below, copying all the file contents and then pasting it into Nemetex.  Please see the Nemetex back-translation flow chart if you are not certain at what point in the process this file would be used.

[Back to Nemetex Page]